handy
 
 
 
 
 
 
Speciality
Our hydraulic Units are leakproof and provided with special wear resistant seals, instead of rubber, which wears out very fast. The Ram & Plunger are ground and HARD CHROME plated to avoid friction and rusting. Moving parts are fitted with provision of lubrication. Frame / Structure are much sturdier than that of all our competitors.
   
Piston & plunger Roads are hard chrome plated and ground to mirror finish made of EN 8 material, the tolerance is h8.
   
Wiper seals are provided on the piston & plunger rod to avoid dirt entering into the Cylinders.
   
The hydraulic cylinders are made of Honed tubes ST-52, cold drawn seamless, BK+ S (Stress Relieved) DIN 2391/1, ID tolerance H8, Straightness =0.1/1000 mm, with high precision honing & polishing for long life.
   
All pins & shafts are of EN 9 Steel, hard & ground to mirror finish.
   
We use “TATA” make rectangular hollow section, the material of the section is as per grade YST 240. Doubling of side plates will also be done at suitable points where max. local bending and shear stresses are caused. There is no question of these rectangular hollow sections bending under worst condition of loading.
   
We provide outer steel bushes inserted in the bore of the scissor arms and welded on its periphery. Inside the bush there is a porous C.I. bush in which there is a groove for retaining grease.
   
All moving parts shall have proper arrangement of occasional and easy lubrication through grease nipples which shall be distinctly marked.
   
Wheels are solid Nylon (UHMW) wide faced wheels, two of which will be steering type. Each wheel running on two reputed make ball bearings hermetically sealed.
   
Every machine is thoroughly checked for any mechanical/structural defects and after being satisfied on all counts, raised to the specified height many a time on safe working load and, thereafter on overload, two/three times to ensure that the hydraulic unit is capable of raising the table to the specified height on overload, without any jerks and the entire structure is safe.
   
After testing, the machines put up for inspection by the customer’s rep. if required by customer.
   
Handy equipments manufactured by Technical Enterprises are famous though out the country for long life, heavy duty & maintenance free equipments.
   
Every part of our equipment is available over the shelf.
   
Service after sales is provided quickly & with smile always.    
 
 
  .......................................................................................................................................................................................................................................................  
 
.......................................................................................................................................................................................................................................................
Site Design, Developed & Maintained By: DOT BIZ, info@dotbizindia.com